| Name | Bone Graft Impactor (Caspar Type) |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel/Plastic |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bone Graft Impactor (Caspar Type)
Bone Graft Impactor (Caspar Type)
graduated 1/4″ to 1-1/4″, shaft 6-1/4″ (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼” to 1 ¼” and features a shaft of 6 ¼”. This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Description
Reviews (0)
Shipping & Delivery
Related products
Twist Drill
SKU:
JBS-1336
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Bone Graft Holder (Caspar Type)
SKU:
JBS-8269
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Clamp
SKU:
JBS-3588
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Depth Gauge
SKU:
JBS-2691
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Clamp (Reposition Forceps)
SKU:
JBS-2254
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Vertebral Body Dissector (Caspar Type)
SKU:
JBS-7521
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Bone Awl
SKU:
JBS-8991
Bone Awl
5-1/2" (14.0 cm)
Bone Awl can have a wide array of applications in orthopedic and neurosurgical procedures. Generally speaking it is used to create or enlarge holes in bone. Specifically it is ideally used to create pilot holes in vertebrae during spinal surgeries. It can be used in bone grafting procedures where the bone needs to be prodded to assess its condition. This awl features a large teardrop shaped handle that makes it easy to handle manually and maintain a firm grip to increase accuracy.
Caspar Cervical Vertebral Body Distractor
SKU:
JBS-6498
Caspar Cervical Vertebral Body Distractor Caspar Cervical Vertebral Body Distractor is a specialized instrument crafted for use in neurosurgical procedures, specifically those of the spine. A distractor aids in creating separation of joint surfaces without causing rupture of binding ligaments without causing any displacement. This can be used in herniated disc procedures to repair pinched nerves or other procedures of the spine. This instrument is available in either a left or right design.
Reviews
There are no reviews yet.