| Name | Caspar Nerve Root Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Caspar Nerve Root Retractor
9-1/2″ (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Description
Reviews (0)
Shipping & Delivery
Related products
Cervical Retractor – Hinged Frame Only
SKU:
JBS-9664
hinged arms
Cervical Retractor can be used in a variety of neurosurgical procedures, specifically spinal surgeries. It features a ring handle for ease in manual operation as well as a hinged frame. This retractor can be used in laminectomies and other surgical maneuvers that require increased access to the spinal lamina or vertebral arch. This instrument is available with either rigid or hinged arms.
Cervical Retractor
SKU:
JBS-8965
9.0 cm spread, hinged frameCervical Retractor is ideally suited for use in retractor of soft tissue and muscle layers in neurosurgical spinal procedures. This instrument can be used at the cervical spinal level in procedures such as laminectomies or hemilaminectomies. Additionally it is available with either a rigid frame or a hinged frame making it more effective at fitting into a variety of different sized patients and opens to a spread of 9.0 cm giving clear access to the surgical field.
Blount Knee Retractor
SKU:
JBS-9793
6.0 mm distal tip, 7" (17.5 cm)Â Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Blade Ejector Forceps
SKU:
JBS-8412
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Beckmann-Adson Laminectomy Retractor
SKU:
JBS-7373
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
JBS-6857
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Beckmann-Eaton Laminectomy Retractor
SKU:
JBS-1948
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Cloward Style Blade Retractor
SKU:
JBS-3477
7-1/2" (19.0 cm)Cloward Style Blade Retractor is a highly versatile instrument crafted for use in a variety of neurosurgical procedures. It is best suited for use in retraction such as that which is necessary in spinal surgery. The ribbed handle giving additional gripping ability and the angled blade design makes it easy to manipulate in the surgical field while keeping the handle out of the plane of surgery. Additionally this retractor is available in four different sizes 13.0 mm (no lip), 18.0 mm, 20.0 mm and 25.0 mm.
Reviews
There are no reviews yet.