| Name | McCulloch Multi-Hooked Blade – Black Finish |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;575744;57-5744;5757-44;S1840;S-1840;RB2148;575745;57-5745;NL9702-041;NL9702041;5757-45;S1842;S-1842;RB2149;575746;57-5746;NL9702-042;NL9702042;5757-46;S1844;S-1844;RB2150;575747;57-5747;NL9702-043;NL9702043;5757-47;S1846;S-1846;RB2151;575748;57-5748;NL9702-044;NL9702044;5757-48;S1848;575749;57-5749;5757-49;5757-44_5757-49; |
| Specialty | Neuro, Ortho & Spine-Retractors – Mcculloch Retractor System |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
McCulloch Multi-Hooked Blade – Black Finish
black finish McCulloch Multi-Hooke Blade is an accessory component that can be used along with the McCulloch retractor frame. The multi-hooked design gives multiple lengths at which small spokes project from the main blade giving retraction ability throughout the length of the blade. This type of instrument is particularly well suited for use in orthopedic spinal procedures that require increased visualization and access to particular segments of the spine . Additionally it comes in a black finish and is available in six blade lengths ranging from 2.0 to 7.0 and is sold in eaches.
Description
Reviews (0)
Shipping & Delivery
Related products
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
JBS-6857
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Beckmann-Eaton Laminectomy Retractor
SKU:
JBS-1948
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Blade Ejector Forceps
SKU:
JBS-8412
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Blount Retractor
SKU:
JBS-5218
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Blount Knee Retractor
SKU:
JBS-9793
6.0 mm distal tip, 7" (17.5 cm)Â Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Beckmann-Adson Laminectomy Retractor
SKU:
JBS-7373
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Aufranc Cobra Retractor
SKU:
JBS-4832
10.0 mm tip, 10-1/2" (26.5 cm)Aufranc Cobra Retractor is a uniquely designed instrument for use in retraction and elevation of spinal roots. This retractor can be used in many different neurosurgical procedures but is especially useful in spinal surgeries. It features a cobra shaped head which gives it a contour well suited for maneuvering in the vicinity of nerve roots and keeping them protected. Additionally this retractor is available in four different tips making it well suited for any procedure: serrated pointed tip, smooth pointed tip, serrated blunt tip, smooth blunt tip.
Cervical Retractor – Hinged Frame Only
SKU:
JBS-9664
hinged arms
Cervical Retractor can be used in a variety of neurosurgical procedures, specifically spinal surgeries. It features a ring handle for ease in manual operation as well as a hinged frame. This retractor can be used in laminectomies and other surgical maneuvers that require increased access to the spinal lamina or vertebral arch. This instrument is available with either rigid or hinged arms.
Reviews
There are no reviews yet.