| Name | Flat Nose Pliers – Slender Jaws |
| Lead Time | 0-3 days |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2″ (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6″ long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Description
Reviews (0)
Shipping & Delivery
Related products
Long Jaw Needle Nose Pliers
SKU:
JBS-4436
2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm)Â Long Jaw Needle Nose Pliers are crafted for use in many different orthopedic surgical procedures. The long tapered jaw design gives the surgeon ability to access deeper into the surgical field. These pliers can be used to firmly grasp wire to twist it or to put particular bends into wire to fasten them to bony sites or around fracture repair to confer additionally stability and accelerate the healing time.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
SKU:
JBS-3988
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
End Cutter – Barrel Spring, Small, Tungsten Carbide
SKU:
JBS-4622
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Flush Wire Cutter – Tungsten Carbide
SKU:
JBS-4434
tungsten carbide jaws, double-action, front & side cutting, cuts up to 1/16" (1.7 mm) diameter hard wire, 7" (17.8 cm)Â Flush Wire Cutter is an instrument designed for use in cutting wires during surgical procedures. A variety of procedures require the insertion of wire to stabilize an inserted graft or fracture repair. This decreases potential for trauma and increases the speed of healing. This cutter features double-action tungsten carbide jaws that allow for precise cuts on wire up to 1.7 mm diameter. This instrument can be used for both front and side cutting.
Hercules-Type Cable Cutter
SKU:
JBS-8339
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm)Â Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Kirschner Bow
SKU:
JBS-2175
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Cannulated Pin Cutter
SKU:
JBS-9958
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm)Â Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Berry Sternal Needle Holder & Wire Twister
SKU:
JBS-2261
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
Reviews
There are no reviews yet.