| Name | Hibbs Chisel |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hibbs Chisel
9-1/2″ (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Description
Reviews (0)
Shipping & Delivery
Related products
Mini-Lambotte Osteotome
SKU:
JBS-7635
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Cobb Spinal Gouge
SKU:
JBS-5884
hexagonal handle, 9-1/2" (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Cobb Spinal Gouges
SKU:
JBS-5883
round knurled handle, 11" (28.0 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a round knurled handle, these micro serrations allow for added gripping to prevent slipping during use. The gouge is designed to be used in the close spaces of the vertebral canal and around it to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Smith-Petersen Gouge
SKU:
JBS-7431
8" (20.0 cm)Â Smith Peterson Gouge is crafted for use in surgical procedures that require manipulation of bone such as scooping or creating a hole. This instrument can be used to increase access to the central soft tissue portion of the bone or in prepping bones from grafting. Uniquely this gouge features a rounded handle that increases gripping and allowing for firm handling and maneuverability. Additionally this instrument is available in either a straight or curved pattern and in seven sizes ranging in width from 6.0 mm to 30.00.
McCulloch Osteotome
SKU:
JBS-3784
8-1/2" (22.0 cm)Â McCulloch Osteotome is an instrument very similar to a bone chisel. This osteotome can be used in many different neurosurgical and orthopedic type surgical interventions that require manipulation of bone. It features a slim handle and a further flattened body that ends in a chisel type point that allows for scooping or scraping of the bone for a variety of reasons including increasing access and visualization to the surgical field. Additionally this osteotome is available in either 4.0 mm width or 6.0 mm width making it suitable for a vast array of surgical procedures.
Stille Osteotome
SKU:
JBS-2923
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Stille Pattern Gouge
SKU:
JBS-1169
straight, 8" (20.0 cm)Â Stille Pattern Gouge is uniquely suited for use in neurosurgical procedures that require cutting and prepping bone. This instrument features a handle that narrows to a slim neck and again widens again to create a funnel type blade. This gouge is prefect for scraping or scooping bone or even in creating holes in the bone itself. The curvature of the blade makes it well contoured to bone and facilitates the cutting process. Additionally this instrument is available six widths: 8.0 mm, 10.0 mm, 12.0 mm, 15.0 mm, 20.0 mm and 25.0 mm making it highly versatile and useful in a wide variety of surgical scenarios.
Cherry Osteotome
SKU:
JBS-7664
octagonal handle, 8" (20.0 cm)Â Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
Reviews
There are no reviews yet.