| Name | McCulloch Hockey Stick Chisel |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;NL9706001;NL9706-001;575766;57-5766;5757-66;NL9706002;NL9706-002;575767;57-5767;5757-67;5757-66_5757-67; |
| Specialty | Neuro, Ortho & Spine-Mcculloch-Pattern Instruments |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | JBS Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
McCulloch Hockey Stick Chisel
8-1/2″ (22.0 cm)Â McCulloch Hockey Stick Chisel is a specialized instrument made for use in orthopedic spinal procedures. It is specifically used in procedures of the spine such as vertebral osteotomy and is particularly well suited with its slim handle and elongated, flattened profile. The angle at the end prevents the tip of the chisel from pierces and causing injury to the spinal cord during surgery. This instrument is available in either a right or left curve making it a versatile tool that fits any patient scenario and satisfies any surgeon preference.
Description
Reviews (0)
Shipping & Delivery
Related products
Hibbs Chisel
SKU:
JBS-4251
9-1/2" (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Cobb Spinal Gouge
SKU:
JBS-5884
hexagonal handle, 9-1/2" (24.1 cm)Â Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Hoke Osteotome
SKU:
JBS-4977
5-1/2" (14.0 cm)Â Hoke Osteotome is crafted for preparation and cutting of bone during neurosurgery. This instrument features a sturdy handle for ease in handling which then narrows at the neck and widens again into a blade. One potential use of this osteotome is to saw through the skull to increase access during surgery such as craniotomy. Additionally this instrument can be used to reshape bony areas. This osteotome is available in either a curved or straight profile in size sizes ranging from 3.0 mm to 16.0 mm making this a highly versatile instrument suitable for a number of surgical procedures.
U.S. Army Pattern Gouges
SKU:
JBS-5712
6-1/4" (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
McCulloch Osteotome
SKU:
JBS-3784
8-1/2" (22.0 cm)Â McCulloch Osteotome is an instrument very similar to a bone chisel. This osteotome can be used in many different neurosurgical and orthopedic type surgical interventions that require manipulation of bone. It features a slim handle and a further flattened body that ends in a chisel type point that allows for scooping or scraping of the bone for a variety of reasons including increasing access and visualization to the surgical field. Additionally this osteotome is available in either 4.0 mm width or 6.0 mm width making it suitable for a vast array of surgical procedures.
Lambotte Osteotome – W/Out Calibration Lines
SKU:
JBS-1239
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Alexander Chisel
SKU:
JBS-2831
straight, 7" (18.0 cm)Â Alexander Chisel is crafted for use in surgical procedures that require cutting, scraping and reshaping of bone. This chisel features a long shaft and on one end features a blunt, flat end for hammering while the other a sharpened blade style end. The lack of a designed handle area increases the versatile of this instrument because it can be gripped in any way that makes the surgical maneuver the most effective. This chisel is available in six different sizes in 2.0 mm increments from 4.0 mm to 14.0 mm making it well suited for small and large tasks.
Mini-Lambotte Osteotome
SKU:
JBS-7635
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Reviews
There are no reviews yet.