Name | Universal Ring Retractor Horizontal Solid Bar |
Lead Time | 0-10 days |
Specialty | General Instruments-Hooks & Retractors – Universal Ring Retractor System |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | JBS Industries |
Sterility | Non-Sterile |
Usage | Reusable |
Universal Ring Retractor Horizontal Solid Bar
Universal Ring Retractor Horizontal Solid Bar
1″ (2.5 cm) diameter, 14-1/4″ (36.5 cm)
Universal Ring Retractor Horizontal Solid Bar is 14 ¼” in length and 1″ in diameter and attaches on a post coupling. Once attached, it contributes to holding the ring retractor and centering it over the operating site. This system can thus be used in a wide variety of surgical procedures to retract open incisions and expand the view of the surgical site.
SKU:
JBS-2438
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Universal Ring Retractor Horizontal Solid Bar” Cancel reply
Shipping & Delivery
Related products
Glass Abdominal Retractor
SKU:
JBS-3374
Abdominal Retractor
6" (15.2 cm) x 3-1/4" (8.3 cm), 9-3/4" (24.5 cm)
B.E. Glass Abdominal Retractor contains a flexible blade with a strong curve that is affixed to a handle for gripping purposes. This type of retractor is intended to be used during surgeries that require retracting or exposing the organs in order to provide better accessibility for the surgeon.
Deaver Retractor – Flat Handle
SKU:
JBS-8763
Deaver Retractor - Flat Handle
flat handle, flexible
Deaver Retractor with a flat handle contains a flexible curved blade that is offered in two different widths and lengths depending on the surgical requirements. During general operations, specifically the involvement of the abdominal or chest cavity, this retractor can allow the surgeon to move one side of the incision to access the area that needs attention. If a deeper section needs to be accessed, the longer and wider blade may be more beneficial.
Balfour Standard Center Blade – For Detachable System
SKU:
JBS-5177
Detachable System
for detachable balfour retractor systems
Balfour Standard Center Blade is designed to be used with the detachable Balfour Retractor Systems. This blade is offered in two different sizes and contains a curved blade with lips on the outer edge to keep an incision open. The handle of this center blade is fenestrated in the middle and includes placement holes so that it can spread to different sizes.
Alm Retractor
SKU:
JBS-9141
Alm Retractor
4x4 prongs
Alm Retractor is a device used during general surgical procedures that involve retracting tissue in small areas of the body. This retractor features 4x4 prongs that are available in sharp or blunt points depending on the type of tissue being held. The instrument is also self-retaining due to a mechanism that allows the surgeon to keep it in a desired place once it has been inserted.
Balfour Narrow Center Blade
SKU:
JBS-9392
Balfour Narrow Center Blade
for detachable balfour retractor systems
Balfour Narrow Center Blade consists of a flat blade on one end that is curved at a right angle. This blade also contains small lips on the edges to keep a large incision open. The handle of this instrument is fenestrated and has small loops that rods from lateral blades can fit onto in order to create the desired spread size.
Deaver Retractor – Flat Handle, Curved End
SKU:
JBS-7244
Deaver Retractor - Flat Handle, Curved End
flat handle, flexible, curved end
Deaver Retractor is flexible and includes a flat handle with a curved end. This uniquely shaped retractor allows the surgeon to have a more comfortable hold while positioning it during surgeries. These surgeries typically involve areas in the deep abdominal or chest cavity. The flexible nature of the slightly curved blade may help to prevent injury to the organs area being held. In order to accommodate certain cases, this instrument is offered in various blade widths and lengths.
Cope Retractor
SKU:
JBS-6475
Double-ended, 6.0 mm & 11.0 mm, 7-1/8" (18.0 cm)
Cope Retractor is a double-ended surgical instrument primarily used to pull back skin or organs that may obstruct the operating area. The main features of this retractor are its different shaped blades. For example, one end contains a strongly curved blade with a lip. The other end, however, contains a sharp, right angle blade with a ridge on the tip.
Cushing Vein Retractor – Fenestrated Handle
SKU:
JBS-7743
Cushing Vein Retractor - Fenestrated Handle
fenestrated handle
Cushing Vein Retractor is a more light-weight instrument due to its fenestrated handle. The lengths can range from 9" to 16." This vein retractor can be used during general surgeries to retract veins or other small tissues. It may also be used in other medical procedures such as neurosurgery to pull back tissue.
Reviews
There are no reviews yet.