Balfour Supra-Pubic Center Blades

Double-Ended double-ended, 1" wide x 9" long Deaver Retractor is typically used during abdominal procedures to keep the organs from interfering with the surgical site. This double-ended instrument has a long, curved blade on one end and a short, right angle blade on the other end. The shorter end may help to retract the walls of the bladder during intravesical surgeries, and the longer end may be helpful for deeper retractions.

Balfour retractor systems w/ fixed side blades Balfour Standard Center Blade is especially designed to be used with the Balfour Retractor Systems with Fixed Side Blades. This center blade comes in two different sizes to accommodate the type of incision that needs to be held open.

Double-ended, 6.0 mm & 11.0 mm, 7-1/8" (18.0 cm) Cope Retractor is a double-ended surgical instrument primarily used to pull back skin or organs that may obstruct the operating area. The main features of this retractor are its different shaped blades. For example, one end contains a strongly curved blade with a lip. The other end, however, contains a sharp, right angle blade with a ridge on the tip.

w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2") Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.